|Do it yourself
Knee Puck rebuild
I)First seperate old puck from backing
A)Use a vice for best results. secure backing in vise and peel old puck
II)Using 3M weather strip adhesive apply a thin film over the back of the
new puck and center it onto the old backing material.
III) Now flip the knee puck onto its face and install T-50 staples to the
center edge of each straight edge of the new puck sucuring it to the old
A)One in the center of the rebuild is always a good idea!!
IV) Now go rip a few corners as you have just saved a ten spot on the
pucks and over time can add tires to your expenses that were once
eaten alive by expensive knee pucks. Your Done!!!
throw money out